You will be surprised to find just the way to spray car paint actually can not be difficult. That doesn’t mean that you go at it and can just grab a tin of paint. There are some principles you must know. Both in the preparation and application.
Prepare by assembling all of your things that you’re going to need.
You will need to analyze the car for any rough spots. These will have to be sanded with 300 grit sand paper. It also enables the spray auto paint to adhere better. Make sure all the dust dirt and debris are taken from the vehicle, after you have finished sanding. It is imperative the automobile be totally clean.
You’ll need to apply a primer. This will make sure that you get an overall even coat of your coloured paint plus helps the paint to stick nicely. When you spray on the primer, make sure you apply light coats and allow for drying in between. How exactly to spray auto paint requires a little getting used to.
Now you are pretty well to the point at which you’re around ready to spray on the color. You may have determined to use the spray auto paint that comes in aerosol cans, or perhaps you might have opted for the spray gun. Before you begin with the automobile in any case, make several practice strokes on an object. Begin the passes with the paint without hesitation, once you are ready. If you hold gun or the spray can in one place, you will end up with uneven coverage and potentially the paint will run. If this happens you have a significant repair job on your had. You’ll most probably have directions as to the best way to spray car paint using the equipment or spray cans.
Check with someone that’s familiar with just how to spray on auto paint, or you may want to study this option on the web
You are down to the finishing touches once you are fully satisfied with the color. You will now need to apply several coats that are clear. This can give the gloss and finished look to the car along with protect the finish. Likely two coatings will be adequate but it’s going to be up to you. Make absolutely certain it truly is dry in between coats.
Yet again, you’ve got the alternative of wet sanding if you favor. Again, I suggest you request the guidance of individuals which are familiar with how to paint an automobile. If you decide to follow this measure then you need with these grits in this order. This will remove spots that’ll be overly heavy in the clear coat application.
Now you’ll need to using a rubbing compound in order to use a 2000 grit Alloy Wheel Repair Billericay to remove any scrapes to buff the surface.
You should now buff the surface. To do this simply use a moderate cut polish.
As a final touch, you might want to apply a few layers of wax.